Abus TV7218 Installationsanleitung Seite 107

32000
transfermode
0
(r/w)
1
2
3
4
sendclientaudio 0
(r/w)
1
source (r/w) 0
1
lowbandwidth (r/w) 0
1
enableaec (r/w) 0
1
Group: Image
NAME VALUE
brightness <-5 ~ 5>
(r/w)
saturation <-5 ~ 5>
(r/w)
contrast <-5 ~ 5>
(r/w)
hue <-5 ~ 5>
(r/w)
mode Preview
(w)
Restore
Save
Group: CCD
NAME
enableblc
(r/w)
mode
(w)
Group: Motion
NAME
enabled
(r/w)
winenabled_<1~3>
(r/w)
winname_<1~3>
(r/w)
winleft_<1~3>
(r/w)
VALUE
0
1
1
Preview
Restore
Save
VALUE
0
1
0
1
<text string shorter than 14
characters >
0 ~ 352 for CCD
0 ~ 320 for CMOS
set bitrate to 32K bps
Full-duplex (Talk & Listen simultaneously)
Half-duplex (Talk or Listen, not at the same time)
Simplex – Talk only
Simplex – Listen only
Disable audio
Do not send audio from active client to all other clients
Send audio from active client to all other clients (only
possible in Half-duplex)
Use external microphone in
Use build microphone
Disable low bandwidth environment support
Improve in low bandwidth environment
Disable
Enable
DESCRIPTION
Adjust brightness of image according to mode
settings. <0>
Adjust saturation of image according to mode
settings. <0>
Adjust contrast of image according to mode
settings. <0>
Adjust hue of image according to mode settings.
<0>
Apply the parameter of image but not save
Restore the last saved image parameters
Directly save the adjust image parameters
DESCRIPTION
Turn off backlight compensation
Turn on backlight compensation
Set auto gain control to MAX level
Apply the parameter of image but not save
Restore the last saved image parameters
Directly save the adjust image parameters
DESCRIPTION
disable motion detection
enable motion detection
disable motion window #1
enable motion window #1
name of motion window #1
<blank>
Left coordinate of window position.
<0>
49