Control Panel; Installation - Klarstein 10026970 Bedienungsanleitung

EN
26

CONTROL PANEL

1 Buzzer
2 Quick
3 Delicate
4 Child lock

INSTALLATION

• This appliance must be earthed. In case of failure or damage, earth can provide a
minimum resistance to reduce the possibility of electric shock.The power cord has
grounding wire with device and power cord with plug. Plug must be inserted into
a properly installed and grounded socket (in accordance with all local rules and
standards).
• A separate earth is required by some local rules. In that case,you need buy
grounding wire, clips and screws.
• Adjust the level to avoid vibration and noise. Machine must be placed in a clean
place, no water, ice and combustible materials there. To keep vibration and noise
to a minimum when the dryer is in use, it should be placed on a fi rm, level surface.
• If the tumble dryer is not completely leveled, need to adjust the front feet up: to
lower the dryer by turning anti-clockwise and to ascend it by turning clockwise till
the appliance will not shake.
5 Delay start
6 LED-Display
7 Indicator lights
8 Start/Pause
9 Indicator ligts
10 Program selector dial