KASK Sports Helmets Gebrauchsanleitung Seite 17

Illustrations and/or description of inside labels:
1
2
3
4 APPLICABLE REGULATIONS 8
5
LABELLING REPRODUCTION
1
2
3 HELMET FOR MOUNTAIN CLIMBING
4
5
Helmet for mountaineers. For adequate protection this helmet has to fit or
to be adjusted to the size of the user's head. The helmet is made to
absorb the energy of a blow by partial destruction or damage, and even
though such damage may not be readily apparent, any helmet subjected
to severe impact should be replaced. The attention of the user is also
drawn to the damage of modifying or removing any of the original compo-
nent parts of the helmet, other than as recommended by the helmet
manufacturer. Helmets should not be adapted for the purpose of fitting
attachments in any way not recommended by the helmet manufacturer.
Do not apply paint, solvents, adhesives or self-adhesive labels, except in
accordance with instructions from the helmet manufacturer. For cleaning,
maintenance or disinfection, use only substances that have no adverse
effect on the helmet and are not known to be likely to have any adverse
effect upon the wearer, when applied in accordance with the manufactu-
rer's instructions and information.
DIAGRAM LABELLING
MANUFACTURER 6
NAME OF THE MODEL 7
MODEL DESIGNATION
SIZE IN CM. 9
KASK 6
PLASMA 7
EN 12492 8
Adjustable 51-62 cm 9
LABELLING
WEIGHT OF HELMET
CERTIFICATION SEAL
MANUFACTURING DATE
IDENTIFICATION NUMBER
350 gr
04.2007
07.550.0002
GB