KASK Sports Helmets Gebrauchsanleitung Seite 11

GB
WARNING: Certain chemical products, especially solvents,
can damage your helmet. Protect your helmet from exposure
to chemicals.
WARNING: Paint and stickeers may contain materials that,
with time, can alter the physical properties of the helmet.
Before applying any of these products, verify their compatibi-
lity with polycarbonate.
WARNING: Your helmet can be damaged from improper care:
do not sit on it, pack it too tightly, drop it, allow it to contact
sharp or pointed objects, etc. Do not expose your helmet to
high temperatures, for example by leaving it inside a vehicle
in direct sunlight.
SPECIFICATIONS: Maximum force passed to the test head in
laboratory conditions: 10kN (EN 12492)
INSTRUCTIONS: As a protective measure, this helmet must
be worn at all times during athletic activity. For adequate
protection, it is important that the helmet be sized correctly
and fit the head properly to offer optimum comfort and safety.
The helmet should be adjusted to fit the user; for example, the
straps should be positioned so that they do not cover the
ears, the buckle should be kept away from the jawbone, and
the straps and buckle should both be adjusted so that they
are comfortable and secure. After properly buckling and
adjusting the strap, always check that the helmet is not
excessively tight; nor should it move freely back and forth.
Verify that the helmet is well seated and centered on the head
(see Fig. 1). The better a helmet is adjusted (minimal
movement front to back or side to side), the better protection
it can provide.