Commissioning; Connections - Is Pac 9146 Betriebsanleitung

english
c) Mounting in the pac-Carrier
Remove the black and green terminals.
Set the IS pac modules in place as described in a) and b) and
completely tilt/snap into the pac-Carrier.
Close the red latching lever using gentle pressure. The latching
lever must engage completely.
To dismount, use a screwdriver to open the latching mechanism as
shown in the picture. The module is nudged out of the slot and can
be removed.
7

Commissioning

7.1 Connections

9146/10-11-12
9146/20-11-11
Hazardous
area
Hazardous
area
Operating Instructions
A, B: Relay A, Relay B configuration see chapter 7.6
Frequency transmitter Type 9146
Safe area
Safe area
17