Oscilla USB-310 Bedienungsanleitung Seite 75

AudioConsole 3
®
Betriebsanleitung für Oscilla USB
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.
a) Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to
fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field
strength in the location in which the USB-300 is used exceeds the applicable RF compliance level
above, the USB-300 should be observed to verify normal operation. If abnormal performance is
observed, additional measures may be necessary, such as reorienting or relocating the USB-300.
b) Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m
AudioConsole 3 75