Geemarc clearsound amplipower 40 Benutzerhandbuch Seite 8

Setting up
1- Connecting the telephone
- Connect the handset cord.
- Open the battery door by unscrewing the
retaining screw. Insert 4 x AAA alkaline batteries
(not included).
Snap the battery door in place.
In case of power failure, batteries are required
for the ring.
- Connect the line cord.
- Connect the shaker cord (optional).
- Connect the headset cord (optional).
- Connect the PTT plug to the wall socket.
- Connect the 12V DC adaptor cord to the
telephone.
- Connect the 12V DC adaptor to your
wall socket (**).
(**) Classified "hazardous voltage" according to EN60950 standard.
2- Alarm and ringer volume setting
A 3 position switch located on the right side
of the phone allows the settings below:
8