Herunterladen Inhalt Inhalt Diese Seite drucken

Installation Instructions; Mechanical Installation - Audio Design SE2400D Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

INSTALLATION INSTRUCTION
REFERENCE NOTE
Before you start with the installation of the sound system, disconnect by any means the GROUND connection
wire from the battery, to avoid any risk of electric shock and short circuits.
Avoid any damage removing of the components of the vehicle like wires, cables, board computer, seat belts, gastank or the like.
Ensure that chosen location provide sufficient air circulation for the amplifier. Do not mount the device into small or sealed spaces without
air circulation near by heat dispersing parts or electrical parts of the vehicle.
Do not mount the amplifier on top of a subwooferbox or any other vibrating parts, thereby parts in the inside of the amplifier may get loosen.
The wires and cables of power supply and the audio signal must be as short as possible, to avoid any losses and interferences.
1
ESX Amplifier
At first you need to find a suitable location to install the
amplifier into the vehicle.
Attend that there remains enough space for the installation
of the cables and ensure that they will not be bended and
have sufficient pull relief.
4 x
3
Drill
Marking
Put the amplifier aside and then drill the holes for the
mounting screws at the before marked locations.
Please ensure not to damage any components of the vehicle
while drilling the holes. Alternatively (depends on the
material of the surface) you can also use self-tapping
screws.

MECHANICAL INSTALLATION

Vehicle
Vehicle
17
4 x
2
Pen or
peening
tool
Mounting
hole
Keep the amplifier at the chosen mounting location in the
vehicle.
Then mark the four drill holes with a appropriate pen or
peening tool through the designated mounting holes at the
amplifier.
4 x
4
Mounting
screw
Mounting
hole
Then uphold the amplifier to the chosen position and fix
the screws through the mounting holes into the drilled
screwholes.
Ensure that the mounted amplifier is fixed tight and not get
loosen while driving.
ESX Amplifier
Vehicle
ESX Amplifier
Vehicle

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis