Specifications - Audio Design SE2400D Benutzerhandbuch

MODELS
CHANNELS
CIRCUIT
OUTPUT POWER RMS 13,8 V
Watts on 4 Ohms
Watts on 2 Ohms
Watts on 1 Ohms
OUTPUT POWER MAX. 13,8 V
Watts on 4 Ohms
Watts on 2 Ohms
Watts on 1 Ohms
Damping Factor
Signal-to-Noise Ratio
THD&N
Input Sensitivity
Input Impedance
FILTER
X-Over Modes
Various Lowpassfilter
Sub Boost @ 20 - 80 Hz
Q-Control
Subsonicfilter
Phase shift
Master/Slave Mode
Bass Remote
Balanced Input
Slave Output (RCA)
Fuse Ratings
Dimensions
Width & Height
Length (Length total)
Technical specifications are subject to change! Errors are reserved!
For damages on the vehicle and the device, caused by handling errors of the device, we can't assume liability.
All ESX Amplifiers are tagged with a individual serialnumber, which will be registerd for statistic and service conditional
purposes.
All ESX Amplifiers are tagged with a E-Certification Number and also a CE-Certification Mark. Thereby these devices are
ceritified for a use inside vehicles inside the European Union (EU).
The warranty conditions comply to the common consumer acts of the European Union (EU).

SPECIFICATIONS

SE2400D
1
CLASS D
Digital
1 x 400
1 x 750
1 x 1200
1 x 800
1 x 1500
1 x 2400
200
90 dB
0,1%
6 - 0.2 V
47 kOhm
Slave - Master
35 - 250 Hz
0 - 18 dB
BREIT - ENG
15 - 55 Hz
0 - 180°
•
•
•
•
2 x 50 A
257 x 60 mm
350 (400) mm
24 25
26