Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENG
SAFETY INSTRUCTIONS
Before you begin with the installation, please attend the following advices
in this manual. Otherwise the risk of injury or a damage of the device
consists.
The power capacitor is equivalent to common directives to be operated in
vehicles inside the European Union and owns a a CE-mark.
The capacitor should be installed by qualified and skilled personnel only. Special
carefulness is essential, because in case of short circuits hazardous high currents
could occur.
The power capacitor stores an extremly large amount of electricity and may
explode or cause serious injury. If the device is used for other purposes than
originally intented or if not proper used or installed, personal injury or material
damage could occur.
The capacitor should be mounted at a mechanically stable position in the vehicle.
The device should be fixed properly and professional.
At no time the power capacitor should be exposed to voltages higher than
specified (max. 18 Volts) or its terminals shorted directly.
Protect the capacitor against humidity and heat.
For cleaning use a dry and soft cleaning tissue, by no means any chemicals
or water.
WARNING!
ELECTRICAL
HAZARD
11
Werbung
Inhaltsverzeichnis
