Installation; Appliance; Installation Of The Appliance - Schaub Lorenz MW 720 Bedienungsanleitung

2. Installation

2.1 Appliance

 Remove all packaging materials before installation.
1 Door lock
2 Window
3 Rotation axis
4 Rotation ring
5 Turntable
6 Control panel
7 Wave guide

2.2 Installation of the appliance

1. remove all packaging materials. If a safety film is on the appliance, pull it off
carefully. Check that the appliance is not damaged. If you detect any damage,
please contact the shop you purchased the appliance at.
2. Install the appliance in a dry and corrosion-safe place. Keep the appliance away
from sources of heat and moisture such as gas burners, water containers etc.
3. Strictly observe the minimum distances for proper ventilation on the schedule
below:
The door has to be closed for proper operation.
Helps you to observe the cooking procedure.
The turntable is placed on the rotation axis. The
motor installed below enables the rotational
movement.
The turntable is also placed on the rotation ring,
which stabilises the turntable and maintenances its
balance.
Place the food on the turntable. The rotation
ensures uniform cooking.
See chapter 3,
OPERATION
The wave guide is installed on the right side inside
the oven cavity.
.
28