Technical Data - Conino Lamborghini EL 3816 TL Originalbetriebsanleitung

Technical data

Electric Lawn Mower
Voltage
Power input
Speed
Cutting width
Cutting height adjustment
Volume of catch bag
Weight
L sound pressure level
pA
L sound power level
WA
Vibration at the handlebars ahv
Protection class: / IPX4
Emissions
• The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
• The specified vibration emission value can also be necessary for the assessment of work breaks are used.
• The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
• Note: You create the privilege against vascular pulsations of the hands in time breaks
Keep the development of noise and vibration to a minimum!
• Only use properly functioning machines.
• Maintain and clean the machine regularly.
• Adapt your working method to the machine.
• Do not overstress the machine.
• If necessary, have the machine inspected.
• Switch the machine off when it is not in use.
• Wear work gloves.
Wear hearing protection. The influence of noise can cause hearing loss.
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require
noise protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
GB | Operating Instruction
(EN 60335-2-77:2010)
(EN 60335-2-77:2010)
EL 3816 TL
V~ 230-240
W 1600
-1
min 3650
mm 380
mm 20-70
L 45
kg 13
dB (A) 83,5
[K3,0 dB(A)]
dB (A) 96
2
m/s 3,05
[K1,5 m/s
5
2
]