Driver Installation - Inline 76617I Bedienungsanleitung

15. Select Safe mode or Capacity mode, and then press Submit. The MSU will help you create the HyperDuo
virtual disk automatically.
16. To create a RAID virtual disk, select Create RAID. Then select RAID level: RAID0, RAID1 or RAID10.
17. Choose enough available physical disks (RAID0 needs at least two physical disks, RAID1 just needs two
physical disks, and RAID10 needs four physical disks), and press Next.
18. Enter the name for the virtual disk, or you can use the default name.
19. Select the Initialization method for the virtual disk.
20. Select the Stripe Size 32K or 64K for the virtual disk.
21. Press Submit. The MSU creates the virtual disk and displays the Property tab for the new virtual disk.
22. Restart your computer to use the virtual disk.

DRIVER INSTALLATION

Installing Driver for supported Windows Vista, Server 2008, Server 2008 R2 and Windows
8.1/8/7 operating system:
1. Start Windows and insert the driver CD into the CD-ROM drive, assume drive D.
2. Windows will automatically detect the SATA card. Right-click Marvell Console ATA Device with yellow mark
in the Other Devices and select Update Driver Software.
3. Select "Browse my computer for driver software".
4. Browse to the following folder on the driver CD according to your operating system:

Windows Vista, Server 2008, Windows 8.1/8/7 32-bit:
D:\Marvell\88SE9230\Windows\storport\i386

Windows Vista, Server 2008, Windows 8.1/8/7 64-bit and Server 2008 R2:
D:\Marvell\88SE9230\Windows\storport\amd64
5. Follow the on-screen instructions to install the driver.
6. After successful installation, the device is listed in the Device Manager as Marvell Unify Configuration
(under System devices).
Installing Driver for supported Windows XP, Server 2003 operating system:
1. Start Windows and insert the driver CD into the CD-ROM drive, assume drive D.
2. Windows will automatically detect the SATA card. Select "No, not this time" and click the Next button to
continue.
3. Select "Install from a list or specific location (Advanced)" and click on the Next button.
4. Browse to the following folder on the driver CD according to your operating system:
 Windows XP 32-bit and Server 2003 32-bit:
D:\Marvell\88SE9230\Windows\miniport\i386
 Windows XP 64-bit and Server 2003 64-bit:
D:\Marvell\88SE9230\Windows\miniport\amd64
5. Follow the on-screen instructions to install the driver.
6. After successful installation, the SATA controller is listed in the Device Manager as Marvell 92xx SATA 6G
Controller (under SCSI and RAID controllers).
7. For this controller, an additional device Marvell Console SCSI Processor Device is detected. Select "No, not
this time" and click the Next button to continue.
8. Select "Install from a list or specific location (Advanced)" and click on the Next button.
9. Browse to the following folder on the driver CD according to your operating system:
 Windows XP 32-bit and Server 2003 32-bit:
D:\Marvell\88SE9230\Windows\storport\i386
 Windows XP 64-bit and Server 2003 64-bit:
D:\Marvell\88SE9230\Windows\storport\amd64
10. Follow the on-screen instructions to install the driver.
11. After successful installation, the device is listed in the Device Manager as Marvell Unify Configuration
(under System devices).
12. Once driver installation is completed, you can now connect your external devices to the SATA card. To install
the driver for the external devices, please refer to the external device user's manuals.
Updating Drivers and Manual
The latest drivers, full version manual and last-minute changes document are available on the website below:
4