Package Contents; Before Installation - Inline 76617I Bedienungsanleitung

INTRODUCTION
The PCI-Express SATA RAID controller card employs the Marvell HyperDuo technology to take the advantages of
the rapid respond of a solid state drive (SSD) and the spacious capacity of a hard disk drive (HDD), to form an
ultimate total solution for a high performance, cost effective and large storage system. HyperDuo uses an
intelligent algorithm to automatically migrate the most frequent access data on the SSD, while all the rest of the
data are safely kept on the hard disk. All these operations are managed by a Storage Utility which organizes the
combination of these physical disks as a HyperDuo Virtual Disk and is totally transparent to users.
The controller expands your PC by three common SATA ports and one 7+15pin SATA port. One common SATA
port and the 7+15pin SATA port are shared by two NGFF B-key sockets. You can connect SATA devices like e.g.
hard drives, DVD-drives, NGFF B-key SATA SSD etc. to the controller card.
The controller card also offers a high performance hardware RAID 0/RAID 1 with SATA 6.0Gbps architecture
solution to the desktop/consumer storage applications utilizing a native 2-Lane PCI Express 2.0 interface to the
host controller board.
FEATURES & SPECIFICATION
General

4-Lane PCI-Express form factor

Based on Marvell PCI-Express 2.0 SATA 6Gbps controller

2-Lane PCI-Express 2.0 interface supports communication bandwidth up to 10.0Gbps

Compliant with PCI-Express 2.0 Base Specification

Three common SATA ports

One 7+15pin SATA female interface to mount 2.5'' SATA HDD/SSD

Two NGFF B-key sockets to mount NGFF 2230/2242/2260/2280 B-key SATA SSD

One common SATA port and the 7+15pin SATA port are shared by two NGFF B-key sockets, and can be
changed manually

Unique Hard Drive Activity LED indicator circuit design: The LED blinks when there is read/write activity on
any one of the hard drive connected to the motherboard or to this add-on card (Optional)

Supports Windows 8.1/8/7,Vista,XP,Server 2003/2008 32-/64-bit,Server 2008 R2, Linux and MAC OS
Serial-ATA (SATA) Interface

Changeable SATA 6.0Gbps ports (SATA, NGFF or their combination)

Up to 4 SATA devices with point-to-point connectivity

Compliant with Serial-ATA Specification 3.0

Supports communication speed of 6.0Gbps, 3.0Gbps, and 1.5Gbps

Supports Hardware RAID 0, 1,10 and JBOD

HyperDuo mode supports Safe mode (Mirrored Protection) and Capacity mode(Cost-Optimized) to build a
system with SSD and HDD hybrid

Bootable

Supports Native Command Queuing (NCQ)

FIS based Port Multiplier

Supports SATA port Hot-Plug

PACKAGE CONTENTS


PCI-Express SATA RAID controller card x 1

Driver CD x 1

User's manual x 1

Screw x 2

Screw Nut x 4

Optional LED cable x 1

BEFORE INSTALLATION


The user must have basic knowledge of installing an add-on card and its driver to a desktop PC. If you have
any queries, please call your local dealer, or find somebody who is experienced in computer hardware
installation.

Motherboard with a free PCI-Express 2.0 slot (x4/ x8/ x16) and a supported operating system installed.
1