Connection Options - Maico aeronom wr 400 Montageanleitung Und Bedienungsanleitung

9.6.5 Connection options

Connection option 1:
Ventilation unit with up to 5 room air
controls RLS 1 WR. Refer also to the
wiring diagram in the appendix.
Up to 5 room air controls RLS 1 WR
i
can be connected to the ventilation
unit.
A Ventilation unit WR 300 or WR 400
A2 Control circuit board: Jumper 8 bridged
= factory setting
B1 1. Room air control RLS 1 WR
B2 2. Room air control RLS 1 WR
W1 230 VAC connecting cable
W2 Control cable (to be supplied by the
customer) for RLS 1 WR room air
controls
V Distributor (to be supplied by the
customer)
80
The ventilation unit is factory-set for
i
the connection of the room air control
RLS 1 WR. Jumper 8 is set on the
control circuit board A2.