Overview Of Controls - studiotechik RF 1200 P-XS PORTY Bedienungsanleitung

HENSEL Studiotechnik
•
Flash systems must not be used in environments with
explosion hazard.
Flammable materials, like furnishing fabrics, paper, etc.
must not be stored in the immediate vicinity of Flash Heads
to prevent fire hazards.
•
Ringflashes must be protected against humidity and spray
water.
•
Do not connect accessories from other manufactures, even
if they use the same or similar connectors.
•
Do not flash into eyes at short distances (smaller than 5 m),
because this can lead to eye damage.
Do not look directly into the flash reflector, the flash lamp
could be triggered inadvertently.
•
Regularly air closed rooms to prevent build-up of
inadmissible ozone concentrations, which can occur due to
the use of high-powered flash systems.
•
During work in the studio generating much dust, the
appliance must be covered with suitable dust protection (not
during operation).
3

Overview of controls

1 Locking screw for vertical shift
2 Locking screw for horizontal shift
3 Screw 1/4" for mounting the camera
4 Thread 1/4" for mounting to a stand
5 Thread 3/8" for mounting to a stand
6 Handle
7 Flash head cable
Page 15
User manual RF 1200 P-XS and 3000-XS