Panasonic JS-925 Serie Benutzerhandbuch Seite 11

2. Operation
■ AC Cord Kit Installation
1. How to install the AC Cord
(1) Carefully lay the Main Body Unit on a clear, flat surface as shown in figure (1).
(2) Unpack the AC Cord, and then connect it to AC Inlet as shown in figure (2).
(3) Fit the Cord Clamp to AC Cord, as shown in figure (3).
(4) Carefully replace the Main Body Unit in upright position as shown in figure (4).
(1) (2) (3)
AC Inlet
(4)
Note:
Confirm the AC Code doesn't move after fixing the AC Code with the clamper.
10