Broncolor RFS Bedienungsanleitung Seite 10

3.) Before the first commissioning or after long working breaks the rFS
system needs to be calibrated. this occurs by pressing the test button,
which is located on the upper side of the transmitter.
2.2 transceiver RFS
Scope of delivery: 1 transceiver, 1 uSB connection cable, 1 sync cable and 1
software data carrier. the data carrier includes 4 data files:
> Software driver for rFS (rFS-driver)
> Software Windows Studio for Pc/Windows
> Software macStudioOSX for Macintosh OS X
> Software macStudioclassic for Macintosh OS 8 and 9
in comparison to the versions Pc/Windows and Macintosh classic, the Mac-
intosh software OS X is irreversible.
installation
a) insert data carrier with the broncolor software in the computer drive
b) connect the uSB connection cable to the uSB-port of the computer
c) install the uSB driver from the data carrier in the computer.
d) Open data file of the corresponding operating system (Windows or
Macintosh OS). Move files "BronStudio.exe" and "BronStudio.xrc" onto
the desktop. Both files must always be stored at the same place so
that the sofwtware is operational.
10