Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REMOVING THE BATTERy PROTECTION
The batteries are already inserted. Remove the plastic strips projecting out of the battery compartment
to start using the product the first time.
PARTS
5
4
3
2
6
7
INSERTING OR REPLACING BATTERIES
1. Open the battery compartment.
2. Place 2 x 1.5 V batteries (AA) in the battery compartment. Ensure correct polarity.
3. Close the battery compartment.
OPERATION
Note: If no setting is made in the setting mode for approx. 10 seconds and if the SET button is also
not pressed, the alarm automatically switches to clock mode and the last setting is accepted.
Setting the time
1. Press the button SET.
2. Press the HOUR button to adjust hours.
3. Press the MIN button to adjust the minutes.
4. Confirm the setting with the SET button.
Setting the alarm
1. Press the SET button twice. AL appears on the display.
2. Press the HOUR button to adjust the hours.
3. Press the MIN button to adjust the minutes.
4. Confirm the setting with the SET button.
5. Alarm is set.
Activating/deactivating alarm
1. Press the SET button thrice to activate/deactivate the set
alarm.
2. The symbols
3. Press the MIN button and
4. Press the MIN button and
5. On reaching the set alarm time, the alarm sounds for 1 minute.
Set hourly announcement
Press the SET button thrice; the symbols
Press the HOUR button to activate/deactivate the hourly announcement.
24 : hourly announcement in the 24-hour mode
15 : hourly announcement in the 15-hour mode i.e. the announcement is made only between 7-21 o'clock.
VGW507_A5_160805.indb 7
1
8
9
10
and
blink.
appears permanently. The alarm is activated.
disappears. The alarm is deactivated.
and
1. 12/24 button
2. MIN button
3. TALK LIGHT button
4. HOUR button
5. SET button
6. Time 12/24 hour mode
7. Alarm ON/OFF
8. Hourly announcement
9. Temperature display
10. Battery compartment
11. Battery compartment cover
11
x 1
1
x 2
blink.
7
24 /
15
1
2
2
5/8/16 11:16 AM
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
