Basic Photometric Functions - Machery-Nagel PF-12 Bedienungsanleitung

For the detailed procedure of the individual tests please follow the correspond-
ing instruction leaflet. You can find detailed descriptions and pictograms on our
homepage, www.mn-net.com, and on the software DVD.

3.5 Basic photometric functions

Method 901: Measurement with factor
1. Select the required wavelength using
pressing
2. Enter factor via keyboard. Confirm with
3. Perform measurement following the instructions in the display.
4. Press
Method 902: Measurement with standard
1. Select the required wavelength using
pressing
2. Enter standard concentration via the keyboard. Confirm with
3. Perform measurement following the instructions in the display.
4. Press
Method 903: Measurement of extinction
1. Select the required wavelength using
pressing
2. Perform measurement following the instructions in the display.
3. Press
Method 905: Measurement of transmission
1. Select the required wavelength using
pressing
2. Perform measurement following the instructions in the display.
3. Press
16
Perform a zero measurement (for a few tests)
Put the clean round tube with the blank value into the
photometer and press
blank value
Perform a measurement
Put clean round tube with sample solution into the
photometer, press key
By calling up method 901 - 903 and 905 you can ac-
cess basic photometric functions or select the re-
quired option in the scroll mode by using keys
and confirm with
.
OK
to return to method selection. The factor will be erased.
ESC
.
OK
to return to method selection. The standard concentration will be erased.
ESC
.
OK
to return to method selection.
ESC
.
OK
to return to method selection.
ESC
N . Remove round tube with
S and read the result.
.
OK
/ and confirm the selection by
.
OK
/
and confirm the selection by
/ and confirm the selection by
/ and confirm the selection by
/
.
OK