Motion: On / Off Selectable - Lupus GEODOME LE335 Benutzerhandbuch

7.2.13 MOTION: ON / OFF selectable.


MOTION DET: ON
DETECT SENSE
BLOCK DISP
MONITOR AREA
AREA SEL
TOP
BOTTOM
LEFT
RIGHT
DETECT SENSE:
BLOCK DISP:
MONITOR AREA: Set whether to use the monitoring frames.
AREA SEL:
TOP:
BOTTOM:
selected
LEFT:
RIGHT:
000~127
ON / OFF / ENABLE
ON / OFF
1~4
000~244 (NTSC) / 000~288(PAL)
000~244 (NTSC) / 000~288(PAL)
550TVL ：000~378 (NTSC)、 000~370 (PAL)
650TVL ：000~474 (NTSC)、 000~468 (PAL)
550TVL ：000~378 (NTSC)、 000~370 (PAL)
650TVL ：000~474 (NTSC)、 000~468 (PAL)
Set the motion detection sensitivity.
Control the ON/ OFF status of the motion detection block
display.
Select the monitoring frame to be set.
Set the top side of the monitoring frame selected
Set the bottom side of the monitoring frame
Set the left side of the monitoring frame selected
Set the right side of the monitoring frame selected
19