Backlight: Blc / Hlc / Off Selectable; Atr: On / Off Selectable; Pict Adjust - Lupus GEODOME LE335 Benutzerhandbuch

The function will detect the Color Temperature to save into the
camera.

7.2.4 BACKLIGHT: BLC / HLC / OFF selectable.


BACKLIGHT.: BLC
Enable the function of Back Light Compensation, and the detection
method is the BLC Smart.

BACKLIGHT.: HLC
Enable the function of High Light Compensation.

7.2.5 ATR: ON / OFF selectable.


ATR.: ON
LUMINANCE LOW 、MID、 HIGH
CONTRAST
LUMINANCE： Set the extent of the luminance compression
CONTRAST：
NOTE: If you enable the ATR funciton, please avoid to enable the
BACKLIGHT
function in the same time.
NR: ↲
7.2.6
NR MODE
Y LEVEL
C LEVEL
NR MODE：
Y LEVEL：
C LEVEL：
NOTE: The Y/C mode is the automanic DNR mode.
ADJUST: ↲
7.2.7 PICT
MIRROR
BRIGHTNESS
CONTRAST
SHARPNESS
LOW 、MIDLOW、 MID、 MIDHIGH、 HIGH
Set the extent of the contrast enhancement.
Y/C、Y、 C、 OFF
000~015
000~015
Set the DNR mode of Y/C, Y and C.
Set the Y filter strength.
Set the C filter strength.
ON / OFF
000~255
000~255
000~255
15