Herunterladen Inhalt Inhalt Diese Seite drucken

Faulty Function; Technical Data; Waste Disposal - Heitronic 37293 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The solar LED light is charged using the solar panel on the top. It automatically switches on at dusk using
the day/night sensor. Make sure that the day/night sensor on the top of the light is not influenced by
another source. Otherwise it will not switch the light on at dusk.
Switch the light off before changing the battery (see above).
Open the battery compartment cover on the back of the product and insert the battery.
Pay attention to the correct polarity of rechargeable batteries as shown in the housing (Size +/-).
Close the compartment cover after inserting the battery.
Press the switch to turn on.

6. Faulty Function

Lamp does not switch on
An external source of light (e.g. street light) is simulating daylight and preventing the light from switching
on. Place the light in a darker position
Lamp does not switch on or only briefly at dark.
Light switched on?
Battery low or defective. Replace the battery

7. Technical Data

Article
37293
1x Li-Ion battery, 3.7 V, 2000 mAh
37294
1x Li-Ion battery, 3.7 V, 2000 mAh
37305
1x Li-Ion battery, 3.7 V, 1200 mAh
8. Care
Disconnect the entire product from the mains first before cleaning or maintaining the product.

9. Waste Disposal

Old electronic devices must be taken to public waste disposal sites and must not be put into general
household waste.
Batteries must not be put into general household waste. As an end consumer, you are legally obligated to
return used batteries. You can return batteries free of charge after use to the point of sale or somewhere
in your direct vicinity (e.g. in communal collection points or retail outlets).
Batteries containing pollutants are marked with the symbol showing a crossed out bin and one of the
chemical symbols Cd (=battery contains cadmium), Hg (=battery contains mercury) or Pb (=battery
contains lead).
Precautions must be taken against short-circuiting if the batteries are not fully discharged. Only
discharged batteries may be put in the old battery containers you find in shops and at public disposal
companies. Short-circuiting can be prevented by isolating the poles with sticky tape.
Supply
Lamp
LED lamp, not replaceable
LED lamp, not replaceable
LED lamp, not replaceable
Protec-
Protec-
tion
tion
Type
Class
IP65
III
IP65
III
IP65
III
3 of 3 | 07.12.2016

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

3730537294

Inhaltsverzeichnis