Hornbach 7452156 Montageanleitung Seite 3

Special Offer Carport (GB)
Assembly Instructions
Hornbach item no. 7452156; manufacturer item no. 60175101
Before beginning with assembly, please first read through the assembly ins-
tructions. Check that your delivery is complete by using the component list.
Should a component be missing or damaged, please contact your specialist
dealer. A completed complaint form is necessary for processing complaints.
We are not liable for costs or damage that occurs as a result of not checking
early on that all pieces were provided. Liability is also excluded in cases of
incorrect assembly and in cases where structural modifications have been
made.
For proper assembly, you will need the structural plans which include the
plans for positioning from your dealer. Always observe the local provisions
and requirements of the responsible building authorities.
Follow the assembly instructions and the corresponding structural details ex-
actly during planning and assembly. Please note that the regulations from
the trade association as well as the generally acknowledged rules of engi-
neering must be observed.
Only approved post anchors may be used. Any type of structural modifica-
tion makes the structure unstable and renders all guarantee claims invalid.
The provided PVC roof panels are not impact or hail proof. As a result, fal-
ling objects may damage the panels. Your specialist dealer would be happy
to assist you if a different grade of material is needed.
Product design is subject to technical changes and improvements.
Tips:
• S tore the carport in a dry place before assembly and protect the assembly
kit from exposure to moisture and strong sunlight to minimise warping or
severe cracking of the components.
• T he components must also be protected against exposure to weather and
wind during assembly.
Parts List: Special Offer Carport
Pos. no. .
10 H0900902230PTG2001
20 H0301202500PTG1001
30 H0301202970PTG1001
40 H0211180500PTG1001
50 H0180983000PTG1001
51 H0180982500PTG1001
60
70
71
Hardware list:
a Rafter anchors
b Screws for Rafter anchors
c Screws for diagonal supports
d Washers
e Carriage bolts
f Nuts
g Spacers
h Screws with sealing washers
i Screws for fascia
The following tools are needed:
• Spade
• Folding rule or measuring tape
• Hammer
• Power drill with a 7mm drill bit
• Spirit level
• Cordless electric drill
• Roof battens / stakes and string line
• 11mm spanner
• 2 screw clamps
Warning!
Post anchors and bolts are not provided in the delivered contents
www.hornbach.de
Description
Posts
Girders
Rafters
Diagonal supports
Fascia
Fascia
Hardware: Special Offer Carport II
PVC - roof panels
PVC - roof panels
35 x 35 x 170
3,5 x 25
4 x 45
M10
M10 x 100
M10
4.5 x 45
3,5 x 35
Important:
• T he PVC panels may only be installed when the temperature outdoors
is 10°C or above. Do not store the panels in a stack, as this may cause
deformation. The maximum temperature of the stack may not exceed
45°C
• I f it is necessary to walk on the panels during assembly, planks must be
used to distribute the weight, otherwise there is a risk of falling through or
causing damage
• P VC panels can be cleaned without pressure using plain water or mild
soapy water. Do not use abrasive, corrosive or solvent-based products.
• I f you would like to paint your carport, it is necessary to wait a few weeks
as the pressure treated wood can still be quite wet. If the carport is a
variation that has not been pre-treated, the dry wooden components can
be painted right before assembly. Please observe the instructions from the
paint manufacturer and only use a porous paint system.
• K eep all of the provided documents in a safe place, including the assem-
bly instructions, the packing slip, the packing label (from the outside of
the package) and the structural documents.
90 x 90
30 x 120
30 x 120
21 x 118
18 x 98
18 x 98
1020x 2200
1020x 2900
Quantity
x 2230 6
x 2500 4
x 2960 8
x 500 8
x 3000 1
x 2500 4
1
3
3
8 left, 8 right
96
32
12
12
12
100
100
48
3