Factory Settings - Kalkhoff IMPULSE EVO RS Originalbetriebsanleitung

6.4.3.20 Impulse Evo Smart Compact display: Name
Path: Settings | Device settings | Name
The "Name" option allows you to enter a name or text with 15 characters,
which is displayed when you switch the pedelec on or off.
1. Navigate to "Name" as described in  6.4.1 Configuring settings in the
main menu Page EN-51.
2. Press the button for one second. The first letter of the word shown
underneath is highlighted white.
3. Use the / buttons to select the desired letters. The letter selected is
highlighted white.
Letters Spacer
A to Z, Ä, Ö, Ü Space
4. Press the button to confirm. You move to the next letter.
5. When you have made your selection, press
return to sub-level 2.
Back/Delete
1. Move to the letter to be changed or deleted.
2. Select < with the / buttons.
3. Press the button to confirm. You move to the previous letter.
6.4.3.21
Path: Settings | Device settings | Other | Factory settings
1.
2. The following question appears on the display: "Reset factory
3. Select the required option using the / buttons. The selection is
4. Confirm your selection by briefly pressing the button. You return to
Back/Delete
6.4.3.22
<
Path: Settings | Device settings | Other | Version
If you want to display the name of the current software version on your
for three seconds to
display and motor, proceed as follows:
Display of software version
1.
2. Pressing the

Factory settings

Navigate to "Factory settings" as described in  6.4.1 Configuring
settings in the main menu Page EN-51.
settings?" with "Yes" and "No" underneath.
highlighted.
sub-level 2.
Impulse Evo (Smart) display: Version
Navigate to "Version" as described in  6.4.1 Configuring settings in
the main menu Page EN-51. This shows the current display, motor and
Bluetooth chip* software.
button returns you to sub-level 2.
Ask if there is a software update for your pedelec in the
course of regular maintenance checks listed in the service
book.
Original User Guide | Pedelec Impulse Evo RS Version 2 EN-65