Preparing The Appliance - adexi Exido Bedienungsanleitung

KEY TO THE MAIN COMPONENTS OF THE
APPLIANCE
1. Upper heating element
2. Temperature control
3. Function selector
4. Timer
5. Indicator light
6. Lower heating element
7. Baking tray
8. Grid
9. Handle
10. Oven door
A handle for inserting/removing the roasting dish and
grid (not shown) is supplied.
1
10
7
9 8
Function selector settings
Function
Symbol
OFF(Off)
Both heating
emlements and fan
active
Upper heating and
fan active
Both heating
emlements active
Upper heating and
rotisserie active
Both heating
emlements, fan
and rotisserie active
2
3
4
5
6
Used for
Oven switched off
Baking and roasting with
upper & lower heating
and fan
Baking and grilling with
upper heating
Baking and roasting with
upper and lower heating
Baking and grilling with
upper heating and sync
motor
Baking and roasting with
upper & lower heating,
fan and rotisserie

PREPARING THE APPLIANCE

Each individual appliance is checked at the factory, but
for safety's sake, after unpacking it, you should check
carefully that it has not been damaged during transport.
• Check whether there is any visible damage (e.g. in
the form of dents or similar), if the door (10) closes
properly, and if the hinges are in order.
• If the appliance appears to have been damaged,
contact the shop where you bought it, and do not
use it until it has been checked by an authorised
specialist.
• Before use, check that you have removed all
packaging inside and out.
• Wash and wipe the baking tray (7) and the grid (8)
before use.
The heating elements were oiled during manufacture
and these will therefore smoke slightly when the oven
is first used. This is entirely harmless and will stop after
a few minutes. However, so that the food does not
taste of this smoke, we recommend that you take the
following action before using the appliance for the first
time:
• Place the baking tray and the grid in the appliance.
• Select upper or lower heat, set the temperature at
230 ºC and set the cooking time for 10 minutes (See
"Operating the Appliance" below). The appliance
starts automatically.
• The appliance automatically switches off after 10
minutes.
The smoke will now have completely disappeared, and
you can use the appliance to cook food.
USING THE APPARATUS
1. Plug in and switch on the power.
2. Place the food in the oven (unless the oven has to
preheat).
3. Close the oven door.
Use the function slector(3) to choose the desired
4.
function (see the above table with function slector settings).
The appliace has five settings:
- Heat from above and below, convection
- Heat from above , convection
- Heat from above and below
- Heat from above and rotisserie
- Heat from above and below,rotisserie,convection
5. Turn the temperature control (2) clockwise to the
desired oven temperature. The temperature can be set at
100-230oC.
20