Submersible Pump - Coitech 18-3152 Bedienungsanleitung

Submersible Pump

Art. no 18-3152 Model XKS-1100S-UK
40-7910
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact Customer Services.
Safety
• Always use a residual current device (RCD or RCCB) which trips at <30 mA between the pump and
the power supply.
• Always inspect the pump before using it, especially the power lead and plug. Never use the pump if it is damaged.
• If the mains lead is damaged it must only be replaced by a qualified technician. Contact our Customer Services.
• Make sure that any electrical connections (extension lead, RCD, etc.) are placed in a dry place and
protected from overflowing water and floods.
• Do not expose the mains lead to extreme heat, oil or sharp edges.
• The pump is not designed for continous use.
• Protect the pump from frost.
• The pump is suitable for pumping clean or muddy water with a maximum particle size of 1 mm (swimming
pool water or washing water). Bear in mind that sand and other abrasive substances in the liquid that is
pumped will increase the wear and tear and reduce the capacity of the pump.
• The pump must never be used in a swimming pool or pond if people or animals are still in the water.
• The pump is waterproof and submersible to a depth of max. 8 m.
• Make sure that the pressure head does not exceed 45 m.
• The pump must not be used in corrosive, flammable or explosive liquids such as petrol, kerosene or
thinners. Neither must the pump be used for grease, oil, salt water, brackish water, and urine or toilet
sewage water.
• The temperature of the pumped liquid must not be greater than 35 °C.
• Dry-running should be avoided, as this soon wears the pump out. Turn off the pump as soon as water has
stopped coming out of the hose.
• Avoid running the pump with the discharge outlet closed for more than ten minutes.
• The pump has a built-in thermal motor protection and automatically shuts off when it gets overheated.
The motor starts again automatically when the motor has cooled.
• If chlorinated water, such as swimming pool water, has been pumped, clean water should be pumped
afterwards to rinse out the pump.
XKS-1100S
3