LotusGrill G340 Bedienungsanleitung Seite 11

Assembly and Operation Instructions
Assembly
1.
Open the battery case at the bottom of the outer bowl
Mind polarity. Close the battery case.
2.
Place the inner bowl
3.
Fill charcoal container
charcoal container
(2)
4.
Apply a circular layer of lighter gel on ignition plate
wide. Place ignition plate
5.
Turn the round ventilation control button on outer bowl
maximum position.
6.
Light gel with a match.
7.
Put the cover
(2)
plate . Within a short period of time, the charcoal will be glowing.
(4)
8.
Put the grill grid
into the slots of the inner bowl
be aligned with the latches.
9.
Hook the latches into the metal loops, and pull down to lock the device. The grill is
now a connected and compact unit.
10.
After approx. 3-4 minutes, LotusGrill is ready for use. Use the On/Off Switch for
heat regulation to regulate heat.
(8)
* Every common type of charcoal can be used. (Excluding Briquettes)
into the outer bowl
(5)
with approx. 250g of Lotus Special Charcoal*. Put cover on
(3)
.
into inner bowl
(4)
In order not to quench the flame, the ventilation needs to be
turned on.
Do not touch the flame!
on the filled charcoal container
Place the charcoal container carefully and evenly on the ignition
plate!
on top of the inner bowl
(1)
. Both metal loops at the side of the grill grid
(5)
. Insert four AA batteries
(6)
.
(6)
, approx 10 mm (0.4 inches)
(4)
.
(5)
on. Turn it clockwise to
(6)
and place container on ignition
(3)
. Make sure to insert the four metal legs
(5)
.
(7)
have to
(1)
English 11