Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Owner's manual
CARBON MONOXIDE DETECTOR
URZ0408
IMPORTANT WARNING STATEMENTS
WARNING: Read all instruction before installation and keep the User's
Manual near the alarm for future reference.
WARNING: Removal of the AC power will render the alarm inoperative. our
Carbon Monoxide requires a continuous supply of electrical power- it will not
work without power.
Carbon monoxide alarms may wear out because they contain electronic
parts that fail at any time. Test you alarm at least every week(see the section
"to test").If the Test Operating DO NOT working, Please replace a new one,
and send for service.
WARNING: This product is intended for use in ordinary indoor locations
of family living units. It is not designed to measure compliance with
Occupational safety and health Administration commercial or industrial
standards. The alarm has not been
investigated for carbon monoxide detection below 40ppm individual with
medical problems may consider using warning devices which provide
audible and visual signal for carbon monoxide concentrations under 30ppm..
CAUTION: This alarm will only indicate the presence of carbon monoxide at
the sensor .Carbon monoxide may be present in other areas.
CAUTION: Accommodation spaces are to be well ventilated when household
cleaning supplies or similar contaminants are used.
Important: This carbon monoxide alarm is designed to detect carbon
monoxide gas from ANY source of combustion. It is not designed to detect
smoke , fire or any other gases.
1.INTRODUCTION
Our Carbon Monoxide(CO) Alarm is designed to monitor the air for the
presence of CO in your home or office. It will alarm when there are potentially
dangerous levels exist independently. And it is a AC power operated unit,
powered by 230V/50hz.
The feature of your CO gas alarm includes:
EN
(1) Easy to install.
(2) Monitoring for carbon monoxide in a continuous manner.
(3) Giving a loud alarm(85DB/10feet) when it detects a buildup of carbon
monoxide.
(4) Having a Test button for you to test the alarm anytime.
(5) Self-testing its operative function continuously.
(6) Complying the requirements of EN50291
(7) End of sensor Life indicator.
10
Werbung
