Construction; Control Panel Features - Cinderella Comfort Bedienungsanleitung

Cinderella incineration toilet
Congratulations on the purchase of your new Cinderella incineration toilet!
Given correct use and maintenance, your incineration toilet will provide great service for many years. This user guide contains
information about use and maintenance. The user guide applies to the model Cinderella Comfort. Information about installation
is included in the enclosed installation guide.
Control panel
Temperature
sensor
Front hatch /
ash container

Control Panel Features

Cinderella Comfort has a display and LEDs for operating messages. Look at the illustration below. For explanation of the mes-
sages, see page 14.
Status
messages
Cinderella has several safety functions
1. The incineration process is inactive while the toilet lid is open. The lid must be closed in order to "flush" the toilet.
2. The hatch to the incineration chamber CANNOT remain open (e.g. during cleaning) while the toilet is still hot. This is only
possible when the toilet has cooled (the fan has stopped).
3. The temperature sensor will be triggered when the internal temperature of the shell unit is too high, and incineration will
then stop. This situation requires a manual reset before the toilet can be used again. Consult the section on faultfinding:
Heating circuit interrupted.
4. The incineration process will be halted if the ash container is incorrectly positioned. A red and yellow light will start flashing
and a warning message is displayed.
5. The toilet fan is programmed to run until the temperature inside the incineration chamber has dropped to 85°C. Should the
mains power supply be interrupted, the battery will continue to power the fan.
Language select
10
Ventilation
Air inlet
(Comfort only)
Language
select
How to select a different language
1. Hold down the 'Language select' button for 3 seconds until " Language" is displayed on
the first text line, and the current language is displayed on the second line.
2. Push the 'language select' button repeatedly until the desired language is displayed.
3. The new language is stored a few seconds after the last push, and the toilet resumes operation

Construction

Cinderella's internal components are manufactured from
acid-resistant stainless steel. The external shell is made from a
composite material. An internal fan cools the toilet and extracts
fumes and vapours. All components are thoroughly tested and
of high quality. Every toilet is subject to an extensive test pro-
gram during the manufacturing process. Cinderella has been
tested and approved by consumer safety testing bodies NEM-
KO, DEMKO, SEMKO, and FIMKO. Cinderella has also been sub-
ject to an EMC test pursuant to current EU norms, and bears
the CE mark. The intelligent incineration system called "SENSE"
detects the appropriate time for termination of the incineration
process, and ensures optimal incineration times and energy
consumption.
Error
Start button
Red light
Combustion
Yellow light
Power
Green light