Herunterladen Diese Seite drucken

SinusTEC ST-A 100.2 Bedienungsanleitung Seite 5

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Lautsprecher und Zuleitung prüfen
• Wenig Bass
• Ein Lautsprecher ist verpolt angeschlossen
• Der Bassregler am Radio steht auf Minimum
Das Gerät schaltet während des Betriebs ein und aus
• Schlechter Massekontakt
•Anschlusspunkte des Kabels oder Batteriepol/-klemme
korridiert
• Zu geringe Spannung
• Remote-Leitung überprüfen
Sollte Ihr Problem nicht behoben werden,
fragen Sie bitte Ihren Fachhändler oder wenden Sie sich direkt
an uns.
8
Dear Customer,
thank you for purchasing this compact amplifier.
To benefit from all special features please read the following
installion instruction carefully. Keep this manual for further
study. Please consult us directly for any further technical ques-
tions: phone: +49 (4191) 5025 – 0, fax: +49 (4191) 5025 -11,
mail: info@sinus-tec.com, www.sinus-tec.com
Use:
This amplifier is only meant for connection to 12 volts DC
power supply. The car battery minus pole must be connected to
the chassis ground. Do not connect this unit to 230 volts or any
other wrong voltage.Do not open the housing. Wrong use can
cause serious damage like a shortcut, fire electric shocks etc.
Installation (without optional ISO adapter)
The installation should be done by trained personal only!
At first remove the minus cable = chassis ground cable from the
battery. Attention: Some settings like the radiocode, timer, seat
memory etc. maybe deleted and must be reset. The plus cable
must have a siutable fuse not further than 30cm away from the
battery. We recommend a 10A fuse and a copper cable with a
thicksness of 2,5mm² for a length up to 5 meters. Sharp edges
must be protected to avoid damages to the cable isolation (for
example with a rubber cap). Install the cable as far as possible
from the car-ignition cables and other cables. For safety and
relaibility the amplifier must be mounted on an suitable place
with the enclosed screw.
Installation (with optional ISO adapter)
The installation should be done by trained personal only!
With the optional ISO adapter, the amplifier can be connected
9

Werbung

loading