Belt-Pack Transmitter - Bosch MW1-RX-Fx Installations- Und Bedienungsanleitung

UHF Wireless Microphone System
4.3

Belt-pack transmitter

Inserting and changing the battery
1 Press the 2 slider release buttons on the sides of
the belt-pack transmitter
2 Move the slider upwards to open the battery
compartment.
3 Insert 2 x LR6/AA/UM3 1.5 V (rechargeable)
batteries according to the indicated polarity.
4 Slide down the slider over the belt-pack
transmitter.
figure 4.4: Changing the batteries (belt-pack transmitter)
Connecting the lavalier microphone to the belt-
pack transmitter
1 Attach the lavalier microphone to a tie, blouse or
jacket by pressing the clip.
2 Plug the mini XLR (tini QG)of the microphone
cable into the microphone INPUT jacket of the
belt-pack transmitter.
figure 4.5: Connecting the lavalier microphone
Bosch Security Systems B.V.
en | 14
IUI-MW1-XXX | V2.0 | 2012.11