Installation; Receiver; Handheld Microphone - Bosch MW1-RX-Fx Installations- Und Bedienungsanleitung

UHF Wireless Microphone System
4

Installation

4.1

Receiver

Connect the two antennas (1) and (2) on the back of
the receiver and align them upward.
1 Plug the AC/DC adaptor in the DC input socket (3)
in the rear panel of the receiver and into a wall
socket or other electrical outlet.
3
figure 4.1: Receiver connections (step 1)
2 Attach the cable behind the pull-out protection
hook.
3 Connect the XLR audio connection cable to the AF
output socket (1) and in the MIC IN input socket of
a mixer or amplifier
1
figure 4.2: Receiver connections (step 3)
Bosch Security Systems B.V.
2 1
4.2

Handheld microphone

Inserting and changing the battery
1 Turn the microphone head counter clockwise.
2 Press the battery release button to release the
battery tray.
3 Insert 2 x LR6/AA/UM3 1.5 V (rechargeable)
batteries in the battery compartment according to
the indicated polarity.
4 Push the battery tray back into the housing.
5 Put the microphone head back on. Pay attention to
the connector inside the head and turn the
microphone head clockwise to close it.
figure 4.3: Changing the batteries (handheld microphone)
en | 13
IUI-MW1-XXX | V2.0 | 2012.11