Hartig+Helling MBF 7010 Bedienungsanleitung Seite 14

Transmitter unit
16 Loudspeaker
17 Operating indicator
18 Night light
19 button (switch on/off)
20 button (paging)
21 Power adapter socket
22 Thread for base
23 Battery compartment
24 Screw for battery compartment cover
Putting the receiver unit into operation
Inserting batteries in the receiver unit
Slide the battery compartment cover on the rear downwards
and remove it.
Insert the batteries in the battery compartment, paying
attention to correct polarity.
Close the battery compartment cover.
Charging the batteries
Connect the power adapter plug to the power adapter socket [15]
on the receiver and a properly installed mains power outlet and insert
the receiver unit in the charger.
The batteries must be charged for at least 8 hours before being used for the first time.
Switching the receiver unit on/off
5 sec. [4]
5 sec. [4]
Operating and charging indicators on the receiver unit
Operating/Charging indicator [2] lights up
Operating/Charging indicator [2] flashes
14
Receiver unit is switched on.
Receiver unit is switched off.
The receiver unit is switched on.
Batteries are being charged.
17
16
G
19 18
20
21
24 23 22