Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instruction manual for »S 70 DRL«
GB
with »daylight-running-function«
Technical data and information
Headlight with 1 LED High Efficiency LED
u
(70 LUX / 170 Lm)
4 Daytime running light-LEDs (4 x 20 Lm)
u
Tested and approved in accordance with the
u
German Road Traffic Licensing Regulations
(StVZO)
Standlight via capacitor
u
Switch functions:
OFF
Both main and
AUTO
The sensor distinguishes between BRIGHT and DARK
> BRIGHT (UV-light) The complete light unit is shining
(The running light is working dimmed and the
> DARK The running light reaches its full capacity, the
standlight function (4 minutes max.)
ATTENTION
If one diode is not working the complete lighting unit must be exchanged.
Functions:
connector for
rearlight
removable
reflector
K 1118
S 70 DRL
DC/AC
6V
2,4W
»
«
daytime-runninglight
are switched off.
Auto/Off Switch
with Auto/Off Switch
u
with voltage security system
u
the front light will be put on automatically
u
when the hub dynamo is activated
with connectors for hub dynamo
u
A ttention: The loading process of the capacitor
u
takes approx. 4 minutes riding time
»
«
day-running-lights
»
day-running light
Mount the headlight with the
enclosed bracket on the bicycles
triple clamp in a way that the cone
of light reach the road 10 m ahead
of the bike.
The following mounting heights
apply to headlamps on bicycles:
Dynamo-
min. height: 400mm
cable-
max. height: 1200mm
connector
Before each ride, make sure that
the tail light is not concealed.
When mounting the light, make
sure that the screws are only fixed
so tightly that the position of the
light can not be removed by itself.
are also shining
«
takes over the
Werbung
