Specifications - PeakTech 4200 Bedienungsanleitung

2. Introduction
The model PeakTech
which will allow your multimeter to measure low electrical or/and
electric current up to 200 A AC, with a frequency response up to
400 Hz. When measuring current with this clamp, there is no
need to break a circuit or to affect the isolation.
The extended
measurements in a narrow space. The clamp adapter is
applicable to leakage detection or monitoring.

3. Specifications

3.1. General
Captured conductor size:
Output impedance:
AC bandwidth:
Operating temperature:
Storage temperature:
Dimensions:
Weight:
Output:
®
4200 AC Current Clamp is a transducer
measurement
16 mm max.
< 1 kΩ
40 to 400 Hz
0° C...50° C, 70 % R.H.
-20° C...+60° C, 80 % R.H.
111 (H) x 50 (W) x 33 (D) mm
130 g
Coil cable with straight banana
plug
-9-
jaws allow performing