Stada Gluco Result Kurzanleitung Seite 2

Checking Your
Blood Glucose
Using STADA
Gluco Result
A guide for testing
your blood glucose
Simple Steps
to Test Your
Blood Glucose
Blood Glucose Testing
1
Wash your hands with
warm, soapy water.
4
Holding the Test Strip Sample Tip to the blood
sample too long after the Meter begins testing
may cause inaccurate results.
This guide provides a brief overview on testing your blood glucose. For more detailed instructions on using the
STADA Gluco Result Blood Glucose Monitoring System, including setting up the time and date, see the Owner's
®
Booklet (German language only). For assistance using your blood glucose Meter, call
© 2015 Nipro Diagnostics, Inc. • E4STA08FD Rev. 22 EN • 9252148 1503
Meter, Test Strips & System Components
®
Test Port
Test Strip
2
Remove Test Strip from vial and close
vial immediately. Insert Test Strip into
Test Port with contacts (metallic blocks)
end facing up. The Meter turns on.
With Test Strip still in
Meter, touch edge of
Sample Tip to blood
drop and allow blood
to be drawn into Test
Strip. Remove Test Strip
Sample Tip from sample 5
drop immediately after
the Meter beeps and
dashes appear across
Meter Display.
Front
Display
Strip
Release Button
Contact End
(metallic blocks
facing up)
Sample End
(Tip)
3
Lance your finger.
After a few seconds glucose
result will be displayed with
date and time.
06101 603 9000.
Back
Compartment
Meter
Label
6
Hold Meter in a vertical position
with Test Strip facing down.
Press Strip Release Button to
discard the used Test Strip from
the Meter.
Battery
0197