TFA ROUNDABOUT Bedienungsanleitung Seite 2

Operating Instructions
Kat. No. 98.1031
ROUNDABOUT Turnable Multi-Functional Alarm Clock
Functions
1. Time with alarm and calendar
2. Temperature, measuring range -9 to +50°C
3. Timer
4. Stop watch
Operating:
Open the battery compartment and insert the batteries (2 x 1.5 V AAA), polarity as illustrated.
Remove the protection foil on the display. The instrument is now read for use.
The 4 functions are selected by turning the alarm clock. The symbol for the selected function is indicated on the
top.
1. Time
•
Display: Time (hours, minutes) and alarm symbol (in case), year, date (month, day), weekday.
•
Press SET button to enter setting mode and to select all settings one after the other.
•
When the digits are flashing set the desired time by pressing ADJ button.
•
TIME Hours → TIME Minutes → DATE Year → DATE Month → DATE Day → ALARM TIME Hours →
ALARM TIME
•
To turn on/off the alarm, press ADJ button in normal mode.
•
Press any button to stop the alarm.
2. Timer
•
Press SET to select minutes or seconds.
•
When the digits are flashing set the desired time by pressing ADJ button.
•
Press SET to start the countdown.
•
Press any button to stop the alarm.
•
When selecting the Timer mode again, the alarm clock will recall the last selected time and start the
countdown automatically.
3. Stopwatch
•
When selecting Stopwatch mode the stopwatch starts to count automatically.
•
Minutes and seconds are shown on the display.
•
Press ADJ to stop the stop watch.
•
Press ADJ to start the stop watch again or SET to reset the stop watch to 0:00.
4. Temperature Mode
In Temperature mode the indoor temperature in °C is shown.
Alarm/Light settings:
You can choose 3 settings by the sliding switch:
1. Position left: Sound on / light off. The alarm sound is activated and a beep sounds when pressing a button.
2. Position OFF: Sound off / light off.
3. Position right: Light on / sound off.
Alarm sounds:
•
In Stopwatch mode while the stopwatch is running you can select by SET 7 different melodies or a beep as
alarm signal.
•
Attention: The sound must be on!
Maintenance
•
Replace the batteries when the display becomes weak or the alarm level declines. Open the battery
compartment and insert the batteries (2 x 1.5 V AAA), polarity as illustrated.
•
Attention: Do not dispose of empty batteries in household waste. Take them to special local collection sites.
•
Do not expose the instrument to extreme temperatures, vibration or shock
•
Clean it with a soft damp cloth. Do not use solvents or scouring agents.
•
Please do not try to repair the unit. Contact the original point of purchase. Please change the b atteries before
complaining. No guarantee if the instrument is handled or opened improperly