Herunterladen Inhalt Inhalt Diese Seite drucken

Spezifikationen - HUTH 2000 FTA Bedienungsanleitung

Digital satelliten receiver
Inhaltsverzeichnis

Werbung

s
pezifikationen:
Elektrische Spezifikation
Video Eingang:
Video Ausgang:
Audio Eingang:
Audio Ausgang:
Haupt Strom:
Anschlüsse
VCR SCART:
TV SCART:
4 x Phono/RCA:
S-Video:
IEEE1284:
RS232:
Modulator/Bypass:
oder:
Satellite IF in:
Satellite IF loop aus:
Tuner
Digital tuner mit LNB in und
´Loop Aus´ voll unterstützt
Frequenz Range LNB in:
Eingang connector:
Impedance:
Eingangsempfindlichkeit:
LNB Schaltspannung
Software gesteuert:
Current limit:
Software controlliert LNB an/aus
LNB 22kHz Tone schaltung:
Amplitude:
Frequenz:
Duty Cycle:
DiSEqC spezifikation V1.0
Universal LNB
Software controlliert an/aus
0/12V Schalter:
Copyright © 1999 - Huth Computer + Peripherie GmbH. Alle Rechte vorbehalten.
Eingang impedance 75Ω
0.7V pk-pk on R/G/B, 1V pk-pk on CVBS/Y
Ausgang impedance 75Ω
0.7V pk-pk on R/G/B, 1V pk-pk on CVBS/Y into
75Ω load.
Eingang impedance >50kΩ AC coupled
Ausgang impedance 600Ω AC coupled
Minimum load impedance 20kΩ
90-250VAC 50-60Hz
S-Video ein und aus
Composite video ein und aus
Stereo/mono audio ein/aus
Composite video aus
RGB video aus
S-video aus
Stereo/Mono audio aus
Composite video aus
0/12V aus
Audio links
Audio rechts
Mini DIN S-Video Y und C aus
25 x D IEEE1284
9 x D RS232 DCE serial port
UHF ein/aus IEC male/female
VHF ein/aus F-type
(country dependent)
F-type
F-type
920-2150MHz
F-type female
75Ω
-30 to -65dBm
13V/18V
0 to 400mA
0.6Vpp (±0.2V)
22KHz ± 2KHz
50% (±20%)
Software controlliert an/aus
37

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

2040 ci

Inhaltsverzeichnis