Introduction; Equipment; Symbols; Presentation - Jri Mini Spy Rf Bedienungsanleitung

I. INTRODUCTION
Congratulations, you own a Mini SPY RF! This device is equipped with 1 internal sensor. It enables you to record the ambient te mperature and to transfer wirelessly
the recorded data by radio frequency to a PC.

Equipment

1 or several Mini SPY RF
1 user manual

Symbols

RECYCLING : do not throw in a rubbish dump or in a domestic waste container. Comply with the regulation to throw the
device away.
CE MARKING : this equipment is certified to comply with the European regulation for the electric security, inflammability,
disturbing radiation emission and immunity to surrounding electric disturbances.
II. PRESENTATION
Running led (green)
Alarm led (red)

INSTALLATION RECOMMENDATIONS

III.
The Mini SPY RF is a recorder of physical parameters able to communicate wirelessly with the SIRIUS operating software.
The wireless communication is based on radio frequency. As we are daily in contact with it (radio, TV...) it is ea sy to think that it always works. This is true if basic
rules on the positioning of recorders are respected because wireless communication is subject to perturbations.
Perturbation sources
Presence of obstacles in the way of waves between the Mini SPY RF ModeM and the Mini SPY RF (wall, ceiling, person, furniture...) or close to the
antenna.
Obstacles thickness in the way of waves. The absorption is more important in diagonal than perpendicularly
Waves cannot go through full metallic walls. On the other hand, a perforated wall allows waves to go through but with attenuation

USE

IV.

Stop

When you receive it, your Mini SPY RF is stopped. Only the time clock is active. It can neither emit nor receive anything.
©JRI Maxant
T° sensor
Identification label
Push button
10