Startup And Settings; Error Display; Replacement Of Filter - Velux ZOV Bedienungsanleitung

Startup and settings

4 6
2 8
0
ZOV --00 0-00
3RV DK01 WW
Model: BE-0A001-01
15
38BF09V
4 6
2 8
0
ZOV --00 0-00
3RV DK01 WW
Model: BE-0A001-01
15
38BF09V
4 6
2 8
0
ZOV --00 0-00
3RV DK01 WW
Model: BE-0A001-01
15
38BF09V
Operation
6 VELUX ®
When connecting the heat recovery
ventilation unit to the 230 V mains
supply, all three light-emitting diodes
are on for 2 seconds to indicate
correct connection.
The ventilation flow can be adjusted
with the control knob in the middle
of the control panel. For more
information, please go to
www.velux.com.
When the ventilation function is
activated, the green light-emitting
diode flashes on and off for
10 seconds.
When you open the ventilation
flap of the roof window, you
automatically switch on the built-in
ventilation system. When you close
the ventilation flap, you switch off
the ventilation system.
ENGLISH

Error display

4 6
2 8
0
ZOV --00 0-00
3RV DK01 WW
Model: BE-0A001-01
15
38BF09V

Replacement of filter

4 6
2 8
0
ZOV --00 0-00
3RV DK01 WW
Model: BE-0A001-01
15
38BF09V
ZOV ––00 0–00
3RV DK01 WW
Model: BE-0A001-01
15
38BF09V
4 6
2 8
0
ZOV --00 0-00
3RV DK01 WW
Model: BE-0A001-01
15
38BF09V
ENGLISH
In case of errors in the heat recovery
ventilation unit, the red light-
emitting diode is on.
To reset the heat recovery ventilation
unit, close and open the ventilation
flap.
Note: If closing and opening the
ventilation flap does not reset the
heat recovery ventilation unit,
contact your VELUX sales company.
A ventilation filter can last about
4000 operating hours. When the
filter is to be replaced, the yellow
light-emitting diode is on.
New filters are available through
your VELUX sales company. Please
provide information from the data
label which is placed on the control
panel.
When the filter has been replaced,
press the reset button to reset the
heat recovery ventilation unit.
VELUX ® 7