Totally Wicked INTU QC 200 Bedienungsanleitung Seite 12

Using your INTU QC 200
Configuring Display Modes
(Charge/Puff Counter/Puff Timer/
Voltage):
When the device is powered on and
VW mode is selected, hold the up
adjustment button and power button
simultaneously until the current
display begins to flash, then use
the up or down adjustment buttons
to cycle through the (Charge/Puff
Counter/Puff Timer/Voltage) modes.
Press the power button to confirm
the selection. The display mode can
only be configured in VW mode,
12
however, the selected display mode
will remain consistent throughout all
VW/Smart/VT/TCR modes.
Custom Logo Mode:
To add a custom logo to the device,
open the 'Firmware Update' software
as described in 'Updating Firmware'.
Click on the 'LOGO' icon and select
the 96 x 16 BMP image file you
would like to upload. To activate/
deactivate logo mode, quickly press
the power button 2 times while the
device is powered on to activate