Inhaltsverzeichnis
Werbung
WHEELS AND BEARINGS
Under normal circumstances and conditions, sbyke® wheels and wheel
bearings are maintenance free. Do not allow water to penetrate the
bearings as they will rust.
CLEANING YOUR SCOOTER
Wipe with a damp cloth to remove dirt and dust. Do not use industrial-
cleaners or solvents as they may damage the surface.
LUBRICATION OF TRUCK BEARING
Lubrication should be applied to the truck bearing after every ten hours
of riding through the following steps:
•
Remove the center adjusting bolt with Allen wrench.
•
Lift axel off the base.
•
Clean the bearing race with a cloth.
•
Apply clean automotive axel grease to the bearing race.
•
Reassemble.
TRUCK TENSION ADJUSTMENTS
Follow the steps below to adjust the truck's tension:
•
Use the gauge supplied in the tool kit.
•
The spring tension is factory set with the spring gauge for a
160lbs / 72 kg rider.
•
Lighter riders may find it easier to carve by reducing the spring
tension by up to one turn counter-clockwise. Heavier riders may
need up to one additional turn clockwise.
•
New riders can get their balance easier with a stiff spring setting.
•
Tight carving is achieved with less spring tension.
•
Use the supplied gauge to set the spring tension back to factory
setting by adjusting the screw until the aluminum retainer is at
the gauge height.
MAINTENANCE
ENTRETIEN / INSTANDHALTUNG
www.sbyke.com
•
1-702-778-5295
10.
Werbung
Inhaltsverzeichnis
