Specifications - MAC Audio SOUNDFORCE 3800 Bedienungsanleitung

If the output of your amplifier is significantly higher than the rated power handling
capacity of your speakers extremely high volumes can physically destroy your speakers.
This doesn't actually happen often but you should be aware that it is possible.
Weak amplifiers with low output ratings can actually be more dangerous for your
speakers at medium volumes because weak amplifiers may overload much faster than
powerful ones and this causes measurable and audible distortion, which is extremely
dangerous to your loudspeakers.
Always turn the volume down immediately as soon as you hear distortion! If you like
listening to loud music make sure that your amplifier can deliver at least as much power
as the speakers' power-handling rating.
THE SOUND YOU CAN'T HEAR...
Amplifiers can produce inaudible high-frequency signals – and this doesn't only apply
to cheap products. If your tweeters fail at low or medium volumes you should have a
qualified technician check your system components for dangerous inaudible signals.

SPECIFICATIONS

Configuration:
Power-handling capacity:
Impedance:
Frequency response:
Recommended amplifier output:
Efficiency (1W/1m):
Dimensions (WxHxD):
Configuration:
Power-handling capacity:
Impedance:
Frequency response:
Recommended amplifier output:
Efficiency (1W/1m):
Dimensions (WxHxD):
SUBJECT TO TECHNICAL CHANGE.
Soundforce 3800
3-way bass reflex
300 / 800 W
4 – 8 ohms
23 – 25 000 Hz
>30 W
97 dB
490 x 832 x 435 mm
Soundforce 1300
3-way bass reflex
150 / 400 W
4 – 8 ohms
30 – 25 000 Hz
>30 W
94 dB
390 x 725 x 260 mm
6
Soundforce 2300
4-way bass reflex
300 / 800 W
4 – 8 ohms
25 – 25 000 Hz
>30 W
96 dB
390 x 1195 x 350 mm
Soundforce 1200
3-way bass reflex
130 / 300 W
4 – 8 ohms
35 – 25 000 Hz
>30 W
92 dB
290 x 555 x 260 mm