Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HOT STAPLER PLASTIC REPAIR KIT
Thank you very much for choosing "HOT STAPLER - PLASTIC REPAIR KIT".
This product is designed for equipment, which carries out repair reinforcement of the plastic article
etc. Please read this instruction manual carefully before using and always keep this manual within
easy reach.
CONTENTS
1. SAFETY AND HANDLING PRECAUTIONS
2. COMPONENT NAMES
3. SPECIFICATIONS
4. HOW TO OPERATE
1. SAFETY AND HANDLING PRECAUTIONS
Please follow this manual strictly for your safety.
WARNING
Once a pin is set to a switch grip and switch is turned on, the temperature of a pin will become
100°C ~ 200°C. If handling is mistaken, it may cause burn, blindness, and a fire.
Wear heat-resistant gloves when working.
Before setting the pin, make sure that tip of the switch grip is cold.
Do not touch heating repair pin with bare hands when it is set in the switch grip.
Do not use near combustible materials.
Since it becomes high temperature, let people around you know it is dangerous.
Do not use with wet hands.
Do not soak this product in water.
Do not use in wet locations.
When you suspend working, and leave the place, turn off the switch then make sure that the tip of
the switch grip has fully got cold.
Repairing objects get high temperature. Please be aware of burning by melted plastic.
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
: l i
n i
o f
@
s
w
s
a t
l h
d .
e
Art. 873
Werbung
