Eleaf iKonn 220 Bedienungsanleitung Seite 53

51
SC iKonn 220 - Using the Device
Charging additional E-Cigarette Batteries
Screw an RC adapter (not included) onto the device and connect it to another battery holder using a USB cable�
With the power off, press and hold down the Up and Fire buttons simultaneously until M1 Mode appears� Press the
Fire button 5 times to access the USB function� Press the Up and Down buttons to turn this function on or off� If the
USB function is activated, you can switch on the device by pressing the Fire button 5 times, and can start charging
an external battery by pressing the button once more�
Updates
The firmware can be updated by connecting the device to an Internet-enabled PC and downloading the software�