Prior To Fi Rst Use; Assembling The Device - Super Hero Z 06404 Gebrauchsanleitung

EN
Prior to fi rst use
ATTENTION!
• Danger of suffocation! Keep children and pets away from the packaging.!
• Unpack all parts and make sure that the product contents are complete (see chap-
ter "Product contents") and check for any damages from transport. If you identify
damages to the components, do not use the device (!), instead contact our customer
service centre.

Assembling the device

For assembly, you will also need a star-headed screwdriver.
Align the
holes
06404_de-en-fr-nl_A5_V2.indb 18 06404_de-en-fr-nl_A5_V2.indb 18
18
1. The fresh water tank (3) has already been installed in the
midsection. Remove it before assembly by fi rst depressing
the release button (2) and then pulling it out. Mount the
midsection on the main unit as shown.
2. Insert the handle in the opening on the midsection and
align it so that the curved end of the handle is on the back
of the device. The handle will lock into place in the right
position.
3. Screw the 3 enclosed screws into the threading on the
back of the midsection (see fi gure) and tighten them with a
star-headed screwdriver.
4. Turn the hook of the upper cord bracket up.
5. Insert the connecting piece on the bottom of the fresh wa-
ter tank in the ring on the bottom of the midsection. Push
the top part of the tank against the midsection until the
catch audibly locks into place.
your Carpet Cleaner.
You have now assembled
02.07.2015 16:04:25 02.07.2015 16:04:25