Prior To Fi Rst Use; Unpacking The Unit; Mounting The Base; Use - THERMOMAXX JNSB-120Y2S Gebrauchsanleitung Und Sicherheitshinweise

Prior to fi rst use
Before you use the product, you must:
• unpack the items supplied,
• mount the base.

Unpacking the unit

PLEASE NOTE!
❐ Keep children and animals away from the packaging material. There is a danger of suf-
focation!
• Unpack the device and the accessories. Ensure that all product contents are present (see
section "Product Contents") and check for any damages from transport. Should you iden-
tify any transport damages, please promptly consult the customer service.

Mounting the base

PLEASE NOTE!
❐ When mounting, ensure that the mains cord is always located on the back of the device.
1. Place the device on a table with the protective grate facing up.
2. If necessary, screw off the two knurled screws on the bottom of the device.
3. Pull the mains cord through the opening on the base and insert it in the opening.
4. Place the base on the connector base on the bottom of the device.
5. Tighten the base on the device with the two knurled screws.
6. Press the cord into the bracket.

Use

PLEASE NOTE!
❐ Keep fl ammable materials away from the device. Ensure that furnishings such as uphol-
stered furniture or curtains are at a distance of at least 1 m from the heating surface of the
device. There should be at least 0.5 m of space behind the device.
❐ Only hold the device by the handle during operation. Keep in mind that the protective
grate and metal parts on the front of the device may still be hot for some time after be-
ing deactivated.
1. Always place the device on a dry, fl at, fi rm and heat resistant surface.
2. Insert the mains plug in an easily accessible socket. Ensure that the mains cord is always
located on the back of the device.
3. Set the POWER switch to I in order to activate the device and the intermediate heating
element (400 W).
16