Intended Use; Construction Of The Four Mandrel Crimping Unit - Rennsteig 6753 0000 6 Betriebsanleitung

Operating Manual four mandrel crimping unit for the battery-hydraulic crimping device HC 20

1 Intended use

The four mandrel crimping unit is only to be used for crimping twisted crimp contacts.
RENNSTEIG provides numerous different four mandrel crimping units with an optimum cross-
section for processing contacts and cross-sections.
The four mandrel crimping unit is manufactured according to the latest state-of-the-art
technology and recognized safety regulations and is exclusively provided for the purpose
specified by RENNSTEIG. The tool is not intended for use in different or more specialised
applications and can result in damage to the tool. No liability or warranty claim is accepted
for such damage.

2 Construction of the four mandrel crimping unit

Adjustment wheel (4)
with directional
information
Crimping dimension locking (3)
(rear)
Battery
compartment (8)
Button ON/OFF (1)
Button MODE (2)
(recessed)
P l u n g e r
(9)
Rev.: 21/07/2014
Contact holder (5)
Union nut (10)
EN
Crimping
location (7)
(crimping
mandrels)
Display (6)
3 / 6