Proper Use - Heinner VDE001 Anleitung

In this way, you can control the electric tool better
in unexpected circumstances.
Wear suitable work clothes. Do not wear loose
clothing or jewelry. Keep hair, clothes and gloves
away from moving parts. Loose clothing, jewelry
or long hair can get trapped in moving parts.
If vacuuming devices and draining devices can be
fitted, make sure that these are correctly
attached and used. The use of a dust extraction
system can reduce the danger posed by dust.
Usage and treatment of the electric tool
Do not overload the appliance. Use the correct
tool for your work. You will work better and more
safely within the given performance boundaries.
Do not use an electrical tool with a defective
switch. An electric tool that cannot be switched on
or off is dangerous and must be repaired.
Pull the plug out of the socket and/or remove the
battery before making any adjustments to the
appliance, changing accessories or put the
appliance down. This safety measure prevents
starting the electric tool unintentionally.
Keep unused electric tools out of the reach of
children. Do not allow people who are not
familiar with the appliance or who have to read
these instructions to use the appliance. Electric
tools are dangerous if they are used by
inexperienced people.
Clean your electric tool carefully. Check whether
moving parts are functioning properly and not
jamming, whether parts are broken or damaged
enough that the functioning of this electric tool is
affected. Have damaged parts repaired before
using the appliance. Many accidents are caused by
badly maintained electric tools.
Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edgesand are easier to control.
Make sure to use electric tools, accessories,
attachments, etc. in accordance with these
instructions. Take the conditions in your work
area into account. Using electric tools for any
purpose other than the one for which they are
intended can lead to dangerous situations.
Service
Have your electric tool repaired only by trained
personnel using only genuine spare parts. This will
ensure that your electric tool remains safe to use.
Description of symbols
Important!
Read the instructions for use before
starting the machine!
Whenever the machine is in use, safety
equipment must be worn: safety
goggles, ear protectors, gloves. If you
are working in an area where there is a
risk of falling objects, a safety helmet
must also be worn.
Remove plug from the mains
immediately if the cable is damaged or
cut.
Do not expose to rain
Never cut with the tip of the blade as
this may result in kickback and cause
personal injury
Double Insulation

PROPER USE

This chainsaw is designed for medium-duty
domestic gardening tasks, such as felling small
trees, cutting logs and firewood.
This chainsaw is ONLY designed for cutting
wood.
Technical data
Voltage: 220V~230V
Frequency: 50Hz
Rated power: 1800W
Maximum cutting diameter: 375mn
Maximum length of the guide bar: 400mn
Oil Tank Capacity: 150ml
Chain pitch: 9.53mm (3/8)
Chain gauge: 1.27mm
Driving sprocket: 6 teeth
Chain speed: 13.5m/s
Puterea garantată a sunetului LwA: 105 dB(A)
ELECTRIC CHAINSAW
4